Advertisement
Tap [Connect to other devices].
3
The speaker system enters pairing mode, you hear a voice guidance (Pairing), and the
on the front speaker flashes twice repeatedly.
Operate the second BLUETOOTH device to search for the speaker system.
4
For details about the operation, refer to "Related Topic."
Follow the on-screen instructions to establish a BLUETOOTH connection.
5
When the BLUETOOTH connection is established, you hear a beep sound from the speaker system and the activity
of the
(BLUETOOTH) indicator on the front speaker changes from flashing to lit.
To operate with the front speaker
You can also set the speaker system to pairing mode by pressing
Changing the BLUETOOTH devices in multipoint connection
While keeping the speaker system connected with 2 devices in multipoint connection, you can attempt to connect
another device via BLUETOOTH connection.
When you operate the speaker system and the third device in an attempt to establish a BLUETOOTH connection, the
BLUETOOTH connection with one of the 2 devices used for the previous music playback or phone talking is retained and
the BLUETOOTH connection with the other device is disconnected. Then, a BLUETOOTH connection is established
between the speaker system and the third device.
Music playback while the speaker system is connected with 2 devices in multipoint connection
When you operate the speaker system to play music, music starts playing on one of the devices in multipoint
connection that was used for the previous playback.
To play music on the other (second) device in multipoint connection, operate the second one to start music playback.
Depending on the condition, you may still hear music playing on the same (first) device from the speaker system
after you operate the second device to start playback. In such a case, you can listen to music playing on the second
one by stopping the playback on the first one.
Receiving a call while the speaker system is connected with 2 smartphones/iPhone devices in
multipoint connection
Connecting the speaker system with 2 smartphones/iPhone devices in multipoint connection places both of the
devices on standby for an incoming call.
When an incoming call arrives to one of the devices in multipoint connection, a ring tone is heard via the front
speaker.
When another incoming call arrives to the other (second) device while you are talking on the first call via the speaker
system, a ring tone is heard from the second device. By ending the call on the first device, you hear a ring tone on
the second device via the front speaker.
Note
While the speaker system is connected with devices in multipoint connection, you hear the beep sound from the speaker system.
(BLUETOOTH) on the front speaker.
34
(BLUETOOTH) indicator
Advertisement
