Advertisement
Help Guide
Portable Theatre System
HT-AX7
Pairing with BLUETOOTH Devices
Check that the speaker system is in pairing mode.
1
During pairing mode, the
Perform the pairing procedure on the BLUETOOTH device to detect the speaker system.
2
When a list of detected devices appears on the display of the BLUETOOTH device, select "HT-AX7."
If a passkey(*) is required on the display of the BLUETOOTH device, enter "0000."
*
The passkey may be called a "passcode," "PIN code," "PIN number," or "password."
Make the BLUETOOTH connection from the BLUETOOTH device.
3
When the BLUETOOTH connection is established, you hear a beep sound from the speaker system, and the
activity of the
(BLUETOOTH) indicator on the front speaker changes from flashing to lit.
If you cannot establish a connection, start from
Note
The above instructions on the BLUETOOTH device are provided as an example. For details, refer to the operating instructions
supplied with the BLUETOOTH device.
Hint
You can connect the speaker system concurrently with up to 2 BLUETOOTH devices. (Multipoint connection)
Related Topic
Preparation: Setting the Speaker System to Pairing Mode
Notes on Pairing
Connecting the Speaker System Concurrently with 2 BLUETOOTH Devices (Multipoint Connection)
Playing Content from BLUETOOTH Connected Devices
Terminating the BLUETOOTH Connection (After Use)
(BLUETOOTH) indicator on the front speaker flashes twice repeatedly.
"Preparation: Setting the Speaker System to Pairing
5-048-914-11(1) Copyright 2023 Sony Corporation
23
Mode" again.
Advertisement
