Advertisement
Help Guide
Portable Theatre System
HT-AX7
Preparation: Setting the Speaker System to Pairing Mode
Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly.
To use BLUETOOTH devices in combination with the speaker system, perform the following pairing procedure for each
device.
The pairing information is stored on the speaker system when the speaker system is turned off.
Before starting operation, check the following.
Place the BLUETOOTH device within 1 m (3.2 ft) of the speaker system.
Connect the speaker system to an AC outlet via an AC adaptor or charge the built-in battery sufficiently.
To avoid any sudden loud sound output from the speaker system, turn down the volume of the BLUETOOTH device
or stop music playback.
Prepare the operating instructions supplied with the BLUETOOTH device for reference.
Turn the speaker system on.
1
The
(Power) indicator on the front speaker lights up in green.
Tap the BLUETOOTH connected device display area (
2
control screen of the app.
The speaker system enters pairing mode, you hear a voice guidance (Pairing), and the
on the front speaker flashes twice repeatedly.
If another BLUETOOTH device is already connected to the speaker system, select [Connect to other devices].
To operate with the front speaker
You can also set the speaker system to pairing mode by pressing
Note
Not connected) on the upper part of the remote
(BLUETOOTH) on the front speaker.
21
(BLUETOOTH) indicator
Advertisement
