Level Setting; Warranty - MB QUART NA3-560.4 Quick Start Installation Manual

Table of Contents

Advertisement

C

Level Setting

1.
turned down (counter clockwise).
2.
turned down. Make sure the source unit controls; balance, fader, bass and
3.
Play a clean musical selection of which you are very familiar. CD is preferred.
Do not use radio signals for level setting. Hit play and start turning the volume
of the source unit up.
4.
Stop increasing the source unit volume when you reach 3/4 (about 75%) or until
you hear speakers begin to slightly start producing distortion.
5.
the level down (counter clockwise) until the distortion is eliminated. Small
D
Remote Level
Control
Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics USA Inc. will, at it's discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper installation
and use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was
purchased. A photocopy of the original receipt must accompany the product being returned. The
costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics
consequential damages connected therewith. To view the full warranty, please visit the website.
MBQuart products are designed and engineered in the USA by
is properly adjusted to match the signal
output level of your source unit.
THIS IS NOT A VOLUME CONTROL!
Some models include a bass
remote. Avoid adjusting the bass
remote while operating vehicle.

WARRANTY

www.maxxsonics.com
MIN
MAX
MBQ NA3 QSG 01 - rev4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Na3-1000.5Na3-600.6Na3-750.1

Table of Contents