Beko CEG 5331 X User Manual page 33

5
Cleaning
2. will flashing. The coffee nozzle will then dispense a small amount
of water which is used for the
WARNING: Water comes out of the coffee nozzle is hot and
is collected in the drip tray underneath. Avoid contact with
splashes of water.
3. After rinsing, the appliance will return to the standby condition.
5.5 Further Setting
5.5.1 Adjusting The Quantity Of Your Coffee/ Hot
Water
The machine can memorize your desired volume of coffee and hot water.
Preparing quantity for Latte Macchiato /Cappuccino/Coffee
1. Place a cup under the spout
2. Switch on the machine, all buttons lights on.
3. Press Latte/Cappuccino / Coffee button, only your desired one illuminates.
4. If machine dispenses milk, press and hold the button to continue and relea-
se the button when milk froth reaches your desired volume. Milk froth stops
with two beep sounds and the volume is now stored.
5. If machine dispenses coffee, touch and hold the button to continue and re-
lease the button when coffee reaches your desired volume. Coffee stops
with two beep sounds and the volume is now stored.
Preparing quantity for Hot Water
1. Place a cup under the spout
2. Switch on the machine, all buttons lights on.
Fully Automatic Coffee Machine / User Manual
rinising.
33 / EN