Adjusting Your Monitor Image - Lenovo G27qe-20 User Manual

Adjusting your monitor image

This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
1
2
3
4
Icon Control
DDC-CI
Exit
Input Source
Increase/Up
Brightness
Decrease/Down
Menu
Enter
Description
Press and hold for 10 seconds to enable or disable the
DDC-CI function.
Exit and return to previous level.
Switches the video input source.
Shift back to previous level when in OSD mode.
Up browsing key.
For increasing the value on adjustment bar/tune in
Press to move to previous item.
Direct access to Brightness adjustment.
Down browsing key.
For decreasing the value on adjustment bar/tune in.
Press to move to next item.
To access OSD menu.
Press to confirm selection.
Press and hold for 10 seconds will lock menu/un-
lock menu.
Press to enter next level on main menu/sub menu
status or enter previous level on adjustment bar.
Chapter 2.Adjusting and using your monitor 2-3