Table of Contents
Advertisement
Player Features
The name of the song, the artist,
the playback mode selected, the
DSP mode selected, the number
of the track playing, and the
elapsed playing time of the track
appear.
Note: The Volume, data rate and
battery indicators may also appear.
•
To play a different track
when the player is stopped:
Press SKIP/FWD. or SKIP/
REV. or rotate the SELECT/
VOLUME control to move
the cursor down or up the list.
To select that track, press in
the SELECT/VOLUME
control.
Note: To play the next or
previous track while the player is
playing, press SKIP/FWD. or
SKIP/REV.
•
To open the folder while the
player is stopped: Place the
cursor next to the folder.
Press the SELECT/VOLUME
control in. To exit the folder,
place the cursor on the top
line of the display and press
SELECT/VOLUME in.
•
During playback, use the
playback features on the
following pages.
7. During playback, adjust the
volume by rotating the SELECT/
VOLUME control up or down.
The Volume level selected appears
in the display.
Cautions
Do not play your headset at a high
volume.
Hearing experts advise against
continuous extended play.
If you experience a ringing in your
ears, reduce the volume or
discontinue use.
Do not use the headphones while
operating a motorized vehicle or
bicycle. It may create a traffic
hazard and is illegal in many areas.
Use extreme caution or temporarily
discontinue use in potentially
hazardous situations.
8. Press STOP•OFF to place the
player in the stop mode.
Note: After approximately one
minute, the player will enter the sleep
mode to conserve batteries
9. Press STOP•OFF again to turn
off the player.
.
13
Advertisement
Table of Contents
