Safety Instructions - Sungrow EMU200A User Manual

Safety Instructions

2
This chapter mainly introduces safety instructions that need to be respected during the
operation of Energy Management Unit EMU200A.
The EMU200A has been designed and tested strictly according to international safety
regulations. As electrical and electronic equipment, the EMU200A must be installed,
commissioned, operated, and maintained in strict accordance with related safety
instructions. Incorrect operation or misuse of the device may cause:
• damage to personnel safety of the operators or the third party
• damage to the EMU200A or other properties belong to the operators or the third party
Therefore, the following safety instructions must be read and always kept in mind prior to
any work. All detailed work-related safety warnings and notes will be specified at the critical
points in corresponding chapter.
All operations and electrical work must only be performed by qualified personnel.
Before Installation
After receiving the device, please check if there is damage caused during
transport. Contact SUNGROW or the forwarding company once any problem is
found.
The related operators must be familiar with the safety instructions in this manual
and other safety regulations about the installation, operation and maintenance of
the EMU200A.
Move, transport, install, operate, and maintain the EMU200A correctly and
appropriately.
During Installation
The EMU200A can only be used as described in this manual. Altering the product
without authorization or using spare parts not sold or recommended by
SUNGROW may lead to fire, electric shock or other damages.
3