Volvo XC90 2019 Owner's Manual page 489

Individual
Adapting a drive mode according to indi-
•
vidual preferences.
Select a drive mode to start from, and then
adjust the settings according to the desired
driving characteristics. These settings are
saved in an individual driver profile.
An individual drive mode is only available if it is
first activated in the centre display.
9 The figure is schematic - parts may vary depending on car model.
9
Settings view for individual drive mode.
1. Press Settings in the top view.
2. Press My Car Individual Drive Mode
and select Individual Drive Mode
3. In Presets , select a drive mode to start
Pure Hybrid
from: ,
Engineered
*.
Possible adjustments apply to settings for:
Driver Display
•
Steering Force
•
Powertrain Characteristics
•
Brake Characteristics
•
Suspension Control
•
ECO Climate
•
Using the electric motor or internal
combustion engine
An advanced control system determines the
extent to which the car is driven on internal
combustion engine, electric motor or both in
parallel.
The primary function is to use the engine or
motor and the available energy in the hybrid
battery as efficiently as possible, with regard
to the characteristics of the different drive
modes as well as the driver's request for
power via the accelerator pedal.
.
There are also cases where temporary limita-
tions in the system, or functions governed by
legal requirements aimed at maintaining a low
level of total emissions for the car, may use
STARTING AND DRIVING
Power Polestar
, or
}}
487
* Option/accessory.