Advertisement
1
GENERAL DESCRIPTION AND WIRING
The JKW-IP and software combine to create a network door entry video intercom system. The JKW-IP adaptor is an
addition to a single door, single master JK boxed set and allows up to 20 sets to be connected to up to 10 computers.
The system allows for call-in to the PC via the JKW-IP software, two way audio and one way video communication
between the door station and the PC, as well as the ability to activate a door or gate release mechanism.
JK Door Station
JK-1MED / JK-1MD
A1
1A1
A2
1A2
PT
2
SOFTWARE SYSTEM REQUIREMENTS
Your computer must meet the following system requirements to use the PC Application. For a complete list of
precautions, notes on usage, and notices, please see the JKW-IP Operation Manual. Please refer to the JK-1MD or the
JK-1MED instructions other specification requirements, such as cabling type and method.
OS
PC system
Requirements
Protocol
Network bandwidth
Language
Browser
Note: Windows is the registered trademark of Microsoft Corporation in the United Sates and other countries.
3
SPECIFICATIONS
Power
Current consumption
Communication
Image Format
Image Resolution
Network Interface
Network Protocol
Email Authentication
Network Bandwidth
Operating Temperature 0°C to 40°C (+32°F to +104°F)
Dimensions
Weight
Color
Note: The PC Application is protected by intellectual property rights owned by International Systems Research Co.
Pg. 2
B1
B2
L
+
+
-
-
L
PS-1820UL
32-bit Microsoft Windows XP (SP3),
®
32-bit Windows Vista Ultimate/Home/Business/Enterprise(SP1)
Processor: 2 GHz or faster
System memory (RAM): 1 GB RAM or more
Hard disk: 10 MB or more (additional space is needed for recording)
Sound card: 8-bit full duplex, Direct Sound compatible
Display: 1024 x 768 or greater
Run-time: Microsoft(R).NET Framework 2.0 or later
Network: 10BASE-T/100BASE-TX Ethernet
TCP/IPv4, UDP/IPv4, SIP, Others
320 k to 8 Mbps (per IP Video Intercom Adaptor)
English, French, Spanish, German, Dutch, Italian, Japanese
Internet Explorer 6.0 or later (with Internet Options SSL 3.0 enabled)
18VDC, Shares power with the JK master monitor
Standby 110 mA, Maximum 200 mA
Hands-free / Priority transmission
JPEG
320×240 (QVGA)
10BASE-T/100BASE-TX Ethernet
TCP/IP, UDP/IP, SIP
CRAM-MD5 hash, or CLEAR (unencrypted). Does not support SSL authentication.
320 K to 8 Mbps (per IP Video Intercom Adaptor)
200 (H)×150 (W)×35.5 (D) mm
7-7/8 (H) x 5-15/16(W) x 1-7/16 (inches)
Main Unit: Approx. 370 g (0.82 lbs)
White
JKW-IP
Option output
B1
Sensor IN 4
B2
Sensor IN 3
LAN
Sensor IN 2
+
-
Sensor IN 1
®
x10
LAN / WAN
Email
Advertisement
