Download Print this page

Abus SMILEY 3.0 Instruction Manual page 2

Advertisement

Available languages

Available languages

Congratulations! You are now the owner of a top quality ABUS helmet. This
helmet has been produced under strict conditions and is certified according to the
following standards:
• Please read and follow these safety instructions. Non-observance of these instructions
could lead to fire, injury to persons and/or device damage!
• Keep packaging material away from children: Danger of suffocation!
• This helmet has passed EN 1080:2013 to show conformity to the respectively Regulation
EU 2016/425.
• EN 1080:2013. Helmet for use by young children while pursuing activities in environments
which have proven risks of head injuries in combination with risk of strangulation.
• ABUS August Bremicker Söhne KG hereby declares that the LED-light complies with
Directives 2014/30/EU and 2011/65/EU. The full text of the EU Declaration of Conformity can
be requested by contacting info@abus.de
• EU Type-Examination Certificate issued by: TÜV Rheinland LGA Products GmbH, NB 0197,
Tillystraße 2, D-90431 Nürnberg.
• The full EU Declaration of Conformity can be found online at: docs.abus.com
Please note that no helmet is indestructible and will not prevent all head injuries and it
cannot substitute looking after the child.
The helmet is intended for use by young children while pursuing activities in environments
which have proven risks of head injuries in combination with risks of strangulation. It is
not intended for cycling, motorsport or moped use (fig. A & B).
Although the helmet is designed to release to avoid possible strangulation it is neverthe-
less recommended that the helmet is removed before climbing.
Warning
This helmet is designed and intended exclusively for use by young children while pursuing
activities in environments which have proven risks of head injuries in combination with
risk of strangulation. It is not intended for and will not provide adequate safety protection
if used during motorsport or moped use.
EN 1080:2013
For the best possible protection, please observe the following guidelines:
1. Usage
This helmet is fitted with self-release retention system designed to release under certain
loading conditions in order to avoid possible strangulation/hanging. It may come off in a
severe crash. Only use this helmet in traffic-free environments.
2. Optimum fit
a) The helmet can only protect your head if it fits correctly.
b) Please try various sizes for comfort and security, ensuring that the helmet sits
horizontally on your head.
1
ABUS_Helmets_Smiley-3.0_EN1080_BDA_148x105mm_MMO.indd 1-2
ABUS_Helmets_Smiley-3.0_EN1080_BDA_148x105mm_MMO.indd 1-2
Do not pull the helmet over your forehead, reducing visibility.
Do not push the helmet towards the back of your head, as this will not protect you forehead.
3. Adjustement of the head ring
Almost all ABUS helmets are available in 2 sizes. Adjusting the helmet to the individual
head size can be achieved, depending on the type, with the following simple-to-use fitting
systems:
4. Adjustment of the straps
When wearing the helmet for the first time, please adjust the straps so that they meet
tautly and comfortably beneath the ears.
Adjustment can be made via the 2 triangular locks.
The child proof lock must be engaged properly with an audible click to prevent accidental
adjustment.
For comfort and safety, do not allow the chin strap to lie across your jawline.
Should the straps be too long, please cut them down to the required length and seal the
ends with a match flame to prevent fraying.
5. Proper maintenance and care
• Regularly check the helmet for signs of damage.
• Do not alter the specification of this helmet as it will reduce its protective effect.
• Do not apply stickers or paint to the helmet as this can be damaging to the materials.
• Do not remodel or misuse the helmet.
• Do not expose the helmet to temperatures in excess of 60˚C. Do not store behind glass,
e.g. in a car (burning glass effect), near heaters etc.
• If you suspect that the helmet has received a large impact, even if there is no visible
damage, please purchase a new helmet.
• This helmet has a limited service life and should be replaced when it shows obvious
signs of wear.
2
21.01.2022 08:13:24
21.01.2022 08:13:24

Advertisement

loading

This manual is also suitable for:

Smiley 3.0 ledSmiley 3.0 ace led