Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Flebi EOLO
Summary of Contents for Flebi EOLO
- Page 1 User’s Manual...
- Page 2 Índice 13. EN067 / DZ41 TFT Full colour display Unpacking and assembly operation 14. Throttle operation (optional) 1. Contents of the box 2. Install handlebars Folded & unfolded 3. Packed in original box 15. Unfolding the bike Setting up 16. Folding the bike 4.
-
Page 3: Contents Of The Box
- Fit the seat post on the frame - Check the adjustment of wheels, brakes and gears - Check tyre pressure If you want, you can discover your new Flebi Eolo virtually in - Connect the battery this video: https://youtu.be/caN1wSCklY8 Check the contents of the box: Flebi Eolo bike, battery in seat post, safety keys. -
Page 4: Install Handlebar
Unpacking and assembly Install handlebar install handlebar telescopic seatpost that allows height adjustment, simply insert it into the handlebar stem following the guides you will find. Once inside, bring it up to the mark and tighten the locking key firmly. Video: https://youtu.be/LGLZHCgfDFo... - Page 5 Packed in original box In case you have to repack your bike in its original box to send it to Flebi service, we recommend that you follow the steps below to protect it as well as possible and avoid bumps...
-
Page 6: Adjusting The Handlebar
Setting up Adjusting the handlebar adjust height handlebars to suit your height. To do this, open the telescopic lock and place the stem in the desired position, taking care not to exceed the safety mark. Then tighten the lock firmly so that it does not move. -
Page 7: Adjusting The Saddle
Setting up Adjusting the saddle You can also adjust the saddle height to suit your height. To adjust the hardness you must tighten the thread according to your taste. Make sure it is not too loose or the seat post will move. To change the angle of the saddle, you can use a number 13 spanner to set the saddle angle. - Page 8 Setting up Disc brake adjustment CAUTION: The Eolo brakes are fully adjusted at the factory and no adjustments are necessary unless they loosen with use. To adjust the mechanical disc brake, first loosen the bolts on the frame to allow some movement of the caliper.
-
Page 9: Shift Adjustment
This can also be done directly on the shifter. The Eolo features 7-speed derailleurs and Speeds: shifters that ensure fast and precise upshift and downshift performance. for hills minor slopes... -
Page 10: Wheel Adjustment
Setting up Wheel adjustment CAUTION: the wheels of the Eolo are fully adjusted from the factory and no adjustments are necessary unless they become loose with use. Front wheel: to install the front wheel, you must check if there is any blocking element in the... -
Page 11: Tyre Inflation
Setting up Tyre inflation To check the amount of air in the tyres, remember that the Eolo carries between 2 and 4 bar of pressure, so it is advisable to use an inflator with a pressure gauge. To inflate the tyres you must remove the cap, put the inflator with pressure gauge to check... - Page 12 Electrical operation Battery removal/insertion The Eolo's factory-fitted 10Ah battery is located in the seat post. It can be removed to be recharged outside the bike, or replaced by another one very easily, as it is the seat post. And, additionally, you can buy: ●...
- Page 13 Electrical operation Installing extendable battery The extendable 6.4Ah bottle battery is added to the one you have installed in the saddle, so you can't use both at the same time. It can be removed to be recharged outside the bike, or easily replaced by another one, as it is the seat post.
-
Page 14: Recharging The Battery
Electrical operation Recharging the battery The Eolo battery can be recharged while mounted in the frame, as it does not need to be removed as it is housed in the seat post. This can be done by uncovering the cover to access the connector. - Page 15 Electrical operation EN067 / DZ41 TFT Full colour display operation The display is operated by pressing the power button in the centre of the display. To operate the bike, you must switch on the battery. Once switched on, you will have several fields: speed, motor charge, battery, assistance levels (5), etc.
- Page 16 Electrical operation Throttle operation (optional) The throttle on the Eolo has the same function and installation as on other Flebi bikes. Unlike the PAS (Pedal Assist System), the throttle operates the motor without the need to pedal. For the trigger-type throttle to work, the display must be switched on and the assistance level set to 0.
-
Page 17: Unfolding The Bike
Folded & unfolded Unfolding the bike The steps to deploy your Flebi Eolo are as follows: - Open the frame and pay attention to the mechanism - Lift the handlebar stem, close the folding lever and insert the lock. - Lift the seat post and connect the... - Page 18 Folded & unfolded Folding the bike The steps to fold your Flebi Eolo are as follows: - Leave the left pedal forward - Lower the saddle to find the support - Operate frame locking mechanism - Pay attention to the magnets that help lock the folding of the bike.
- Page 19 Folded & unfolded Opening / closing the frame To open or close the frame, you only have to remove the latch in case of opening and put it on in case of closing. And release the folding lever outwards to open it, and press it inwards to close Video: https://youtu.be/JeGYup-mW0I...
- Page 20 Folded & unfolded Folding / unfolding of the pedals To fold or unfold each Wellgo pedal, press the knob outwards and, at the same time, fold the pedal inwards (folded) or outwards (unfolded) until you feel the block. Video: https://youtu.be/-_fBRnSFPPM...
- Page 21 Folded & unfolded Handlebar folding mechanism First of all, make sure that the cables are not too tight due to the height of the handlebar. To fold the handlebar stem, you must remove the lever lock and open the lever by pressing it outwards and then fold the stem down.