RCA NRD412NA Owner's Manual page 44

Connections
Connection C
Good Picture and Sound Quality
To use this connection you must have:
• TV with RF input (jack)
• VCR with RF and audio/video inputs
• Coaxial and audio/video cables
To connect TV, VCR, and antenna or cable box.
1. Connect coaxial cables and audio/video cables as shown.
®
To receive DSS programming:
• Tune TV to channel 3 or 4 (depending on how you set
the CH3/CH4 switch on the back of the DSS
To receive off-air programming (no cable box):
1. Turn off VCR and DSS
2. Tune TV to desired channel.
To receive cable programming (with cable box):
1. Turn off VCR and DSS
2. Tune TV to cable box output channel (usually CH2, CH3,
or CH4).
3. Tune cable box to desired channel.
To record DSS ® programming:
1. Tune TV to the channel on which you receive the DSS
signal.
®
2. Tune DSS receiver to desired channel.
3. Set VCR to record on line input.
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
®
2. Turn DSS receiver off.
42
® receiver).
® receiver.
® receiver.
TV
DSS
RECEIVER
VCR
CH3
CH4
®
CAUTION
Do not stack electronic components
or other objects on top of the DSS
receiver. See Safety Information,
inside front cover.
IN
SATELLITE
DISH
OUT TO TV
IN FROM ANT
SATELLITE IN
CH4 R L
VIDEO
CH3
AUDIO
OFF-AIR ANTENNA
IN FROM ANT
VIDEO IN AUDIO IN
R L
OUT TO TV
VIDEO OUT AUDIO OUT
CABLE
OR
®