RCA NRD412NA Owner's Manual page 43

Connections
Connection B
Very Good Picture and Sound Quality
To use this connection you must have:
• TV with separate RF and audio/video inputs (jacks)
• VCR with RF and audio/video inputs
• Coaxial and audio/video cables
To connect TV, VCR and antenna or cable box.
1. Connect coaxial cables as shown.
2. Connect audio/video cables as shown.
®
To receive DSS programming:
1. Tune TV to receive line output from DSS
(often called Input 1).
2. Tune DSS ® receiver to desired channel.
To receive off-air programming (no cable box):
1. Turn off VCR and DSS
2. Tune TV to desired channel.
To receive off-air programming (with cable box):
1. Turn off VCR and DSS
2. Tune TV to cable box output channel (usually CH2, CH3,
or CH4).
3. Tune cable box to desired channel.
®
To record DSS programming:
1. Tune TV to record line output from DSS
®
2. Tune DSS receiver to desired channel.
3. Set your VCR to record on DSS
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
®
receiver
® receiver.
® receiver.
® receiver (Input1).
® output channel (CH3 / CH4).
TV
IN
VIDEO R
AUDIO
DSS
OUT TO TV
RECEIVER
IN FROM ANT
CH4
CH3 VIDEO
VCR
VIDEO IN AUDIO IN
IN FROM ANT
CH3
CH4
R
OUT TO TV
VIDEO OUT AUDIO OUT
CAUTION
Do not stack electronic components
or other objects on top of the DSS
receiver. See Safety Information,
inside front cover.
L
SATELLITE
DISH
CABLE
SATELLITE IN
R L
OR
AUDIO
OFF-AIR ANTENNA
L
®
41