Witness Sled; Removing A Witness Sled Blank - Dell PowerEdge XR4000z Installation And Service Manual

Figure 33. Installing a power supply unit blank

Witness sled

Removing a witness sled blank

Prerequisites
Follow the safety guidelines listed in Safety instructions.
Steps
1. Pull up the plunger located on the witness sled blank.
2. Remove the witness sled blank.
NOTE: The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
Figure 34. Removing a witness sled blank
Next steps
Install the witness sled or witness sled blank.
Installing and removing system components 41