RCA DRC8295N User Manual page 12

Chapter 1: Connections and Setup
The back of your TV
and/or Cable Box might
look different than the
ones pictured here.
DVD/VCR
CABLE IN
1 1
Cable Box
Notes about cable boxes:
If you have questions about using a cable box with the DVD/VCR, consult your cable company. RCA can only provide general
instructions because cable services and cable boxes differ in various areas. This connection only shows a basic RF Coaxial Cable
connection, your cable box may have Audio Video or S-Video jacks.
If you connect your components as described, you must access different Video Input Channels on your TV to see programming. If you don't know how to
access Video Input Channels on your TV, go to page 18 for help. A general explanation, based on the connection shown above, follows:
To watch one program while
you record another:
To play a disc or tape:
If you need help finding your TV's various Video Input Channels, go to page 18.
* The remote control packed with your DVD/VCR is capable of being programmed to operate many brands and models of TVs. For instructions, go to page 21. If the
remote operates your TV, press TV and INPUT to access the Video Input Channel.
10
DVD/VCR
CABLE/ANTENNA
INPUT
VIDEO
INPUT
CABLE/ANTENNA L
AUDIO
1b
1b
OUTPUT
R
CH3 CH4
CABLE OU T
2a
2a
CABLE/ANTENNA
TV
Tune the TV to its Input 1 channel or Vid 1 channel.
Tune the DVD/VCR to the cable box channel (usually channel 2, 3, or 4).
Use the channel buttons on the cable box to tune to the channel you want to record. Press the
RECORD button on the DVD/VCR.
Use the buttons on the TV (or the TV's remote control*) to tune the TV to the channel you want
to watch.
Tune the TV to its Input 1 channel or Vid 1 channel.
Graphics contained within this publication are for representation only.
DVD Playback Only
DIGITAL
COMPONENT
OUTPUT
S-VIDEO
VIDEO OUTPUT
AUDIO OUT
VIDEO
Y
IN
Pb
L
AUDIO
Pr
OUT
R
OPTICAL
2d
2d
2c 2c
VIDEO
S-VIDEO
INPUT1
S-VIDEO
INPUT2
PROG.
SCAN
ON
OFF
2b 2b
L
R
AC-IN
4 4