Advertisement
How to add more Powerline extenders to your existing network
You can expand your home network by adding more extenders to your existing kit.
1 Plug your additional broadband extender directly into a wall power socket.
Make sure the socket's switched on.
2 Press the Link button on your additional broadband extender for 5 to 8 seconds.
Wait for the Power light to go back to steady green.
3 Press the Link button again, this time for 1 second.
4 Within 2 minutes, press the Link button on one of the broadband extenders already in
your home for 1 second to complete the connection to the network.
5 Wait for connection to complete. If everything's okay, the Power and Data indicators on
the new extender will light up.
TIP: you might find it easier to plug your new broadband extender in the same
double power socket or near one of your existing ones whilst you set things up.
To connect using the ethernet cable
1 Connect your device to one of the ethernet ports on the hotspot.
You'll need an ethernet cable for each device you want to connect to the hotspot.
General information
For information on safety
instructions, technical information
or setting up, please see the
Frequently Asked Questions at
bt.com/minihomehotspot600
Guarantee
Your Mini Wi-Fi Home Hotspot 600 Kit is guaranteed
for a period of 3 years from the date of purchase.
Subject to the terms listed below, the guarantee
will provide for the repair of, or at BT's or its agent's
discretion, the option to replace the Mini Wi-Fi
Home Hotspot 600 Kit or any component thereof
which is identified as faulty or below standard, or as a
result of inferior workmanship or materials. Products
over 28 days old from the date of purchase may be
replaced with a refurbished or repaired product.
The conditions of this guarantee are:
• the guarantee shall only apply to defects that
occur within the 3 year guarantee period
• proof of purchase is required
• the equipment is returned to BT or its agent
as instructed.
This guarantee does not cover any faults or defects
caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any
attempt at adjustment or repair other than through
approved agents.
This guarantee does not affect your statutory rights.
To find out what to do if your kit is in or outside of the
3 year guarantee, please see the Frequently Asked
Questions at bt.com/minihomehotspot600
How to recycle your equipment
The symbol shown here and on the product
means that the product is classed as electrical
or electronic equipment, so DO NOT put it in
your normal rubbish bin.
It's all part of the Waste Electrical and Electronic Equipment
(WEEE) Directive to recycle products in the best way – to be
kinder to the planet, get rid of dangerous things more safely
and bury less rubbish in the ground.
You should contact your retailer or supplier for advice
on how to dispose of this product in an environmentally
friendly way.
R&TTE Directive & Declaration of Conformity
This equipment complies with the essential requirements
for the Radio Equipment and Telecommunications Terminal
Equipment Directive (1999/5/EC).
For a copy of the Declaration of Conformity
please refer to bt.com/minihomehotspot600
This product uses open source codes available from
bt.com/help/gplcode
Mini Wi-Fi Hotspot 600 Power consumption
In operation
Network standby
Off mode
Broadband Extender 600 Power consumption
In operation
Network standby
Standby mode
Elapsed time before going into standby mode 5 Minutes
4.7 Watts
2.7 Watts
0.1 Watts
2.5 Watts
1.9 Watts
0.4 Watts
Advertisement
