Beko BBVM17400BPS User Manual page 24

To cook in one large section, re-
move the cross-partition sheet
from the product.
1. To cook in one large section, remove the
cross-partition sheet from the product.
If you only want to cook in the lower or
only upper section, install the intermedi-
ate compartment sheet.
2. Turn on the oven by touching the
ð If the cross-partition sheet is not
installed after the oven is opened,
the first operating function of the
single large section appears on the
screen. If the crosspartition sheet
is inserted, the first working func-
tion for the lower section is dis-
played.
Illustration 1: If the cross-partition sheet is
inserted:
Illustration 2: If the cross-partition sheet is
not inserted:
3. When the cross-partition sheet is inser-
ted, the lower section cooking area
screen is activated. Just tap
select the upper section.
ð The
symbol appears next to the
function screen belonging to the
upper section.
4. When the cooking section you want to
cook is active, select the function you
want to cook with the function selection
key.
button.
5. The pre-set temperature for the operat-
ing function you selected appears on
the display. Set the temperature you
want to cook with the temperature knob
if you would like to change this temper-
ature.
6. If you want to cook without setting
key to
the cooking time, tap
cooking.
EN / 24
If you change the operating func-
tion after you change the pre-set
temperature of the operating func-
tion, the last temperature set is
shown on the display. However, if
the selected temperature is not
within the temperature range of the
selected operating function, the
highest temperature for that operat-
ing function is displayed.
If the cooking is started without ad-
justing the cooking time, the oven
does not automatically turn itself
off at the end of cooking. The user
must end the cooking.
key to start