Table of Contents
Advertisement
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Restrictions when using
This function is available on all hotplates, provided that no other
hotplate in the same group is operating, (see picture).
Otherwise, the
and
symbols will flash on the display of the
›
Š
selected hotplate; then the power level
*URXS
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■
Turning off a hotplate automatically
Enter the cooking time for the required hotplate. The hotplate
turns off automatically once the time has elapsed.
How to program
Select the required power level.
1.
Press the
symbol of the desired hotplate. The hotplate
0
2.
display shows
and the indicator
‹‹
Select the required cooking time in the programming panel.
3.
The possible previous setting is, from left to right 1, 2, 3, etc.,
up to 10 minutes. Within the next 10 seconds, continue
passing through the options in the programming panel until
reaching the desired time.
The cooking time will be displayed for 10 seconds then begin
to count down.
10
.
Š
is automatically set.
Š
*URXS
comes on.
x
To activate
Select the power level
Š
1.
Press the programming panel located above the
2.
The function has been activated.
To turn off
Press the programming panel located above the
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Automatic programming
If the previous setting from 1 to 5 is pressed in the
programming panel, the cooking time is reduced by one
minute, if it is held down the time is automatically reduced to
one minute.
If the previous setting from 6 to 10 is pressed in the
programming panel , the cooking time is increased by one
minute, if it is held down the time is automatically increased to
99 minutes.
Once the time has elapsed
The hotplate switches off. The beep sounds and the display
comes on
for 10 seconds. The
‹‹
Pressing the
symbol turns off the indicators and stops the
0
beeping.
Changing or cancelling the time
Press the
symbol of the desired hotplate. Change the
0
cooking time in the programming panel, or set to
Note: Any cooking time can be programmed up to 99 minutes.
Automatic timer
With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time of a hotplate may be cancelled or
changed:
Press the
0
symbol of the desired hotplate. Change the
cooking time in the programming panel, or set to
.
@›
@›
indicator lights up.
x
‹‹
‹‹
symbol.
symbol.
.
.
Advertisement
Table of Contents
