AT&T E2116 User Manual page 6

3.After you hang up, the phone automatically returns to pulse service.
Message Waiting
Your E2116 (M/B) is designed to work with most local and regional telephone service provider's
voice messaging systems, providing alerts on both the handset and base unit when new
messages come in.
Voice messaging is subscription service, available through most service providers, for a monthly
fee. Contact your local telephone company for more information.
When a caller leaves a message in your voice mailbox, the MESSAGE light on the base unit will
flash. In addition, the handset will display:
Clear Message Waiting Alert
If you wish to manually turn off the message waiting light:
1. Press PROG.
2. Press or until screen displays MESSAGES WAITING.
3. Press SELECT, the screen displays:
4. Press or to change from YES or NO.
5. Press SELECT to choose the desired setting. You'll hear a confirmation tone.
Display Screen Messages
Screen Displays: When: ** RINGING **
CONNECTING...
PHONE ON
SCANNING...
** PAGING **
HOLD
BATTERY LOW
NO CONNECT
There is a call coming in.
The handset is waiting for a dial tone.
The handset is in use.
The handset is changing to another of the 30 channels available.
The base is paging the handset.
There is a call on hold.
The battery needs to be recharged.
Displays and a sad tone sounds when the base power is off and (phone) / FLASH is pressed.
MESSAGES WAITING
RINGER OFF
You have been alerted by the telephone company that you have received new voice mail.
The ringer is turned off.