Note1: For details about the relationship between the MSB value and the tone, see the Tone List that comes with the
Instrument.
Transmit Sent when a tone setup number is selected.
Receive Receipt causes a change in the tone bank number stored in Instrument memory, but the
tone is not actually changed until a Program Change message is received. For details, see "8 Program
Change".
7.2
Modulation wheel or lever (01H)
Message Format:
BnH 01H vvH
n:
MIDI Channel Number
vv:
Value
Receive Receipt adds, to the tone being sounded, modulation of a depth specified by the value. In
the case of a tone that already has modulation applied, receipt of this message increases the modulation
depth. The modulation effect differs according to the tone being used.
7.3
Portamento Time (05H)
Message Format:
BnH 05H vvH
n:
MIDI Channel Number
vv:
Value
Receive Receipt changes the portamento application time.
7.4
Data Entry (06H,26H)
Message Format:
BnH 06H mmH (MSB)
BnH 26H llH (LSB)
n:
MIDI Channel Number
mm:
MSB Value
ll:
LSB Value
Transmit Sent when there is a change to the parameter assigned to RPN, NRPN. (CT-S400/CT-S410)
Receive Receipt changes the parameter assigned to RPN, NRPN.
7.5
Channel Volume (07H)
Message Format:
BnH 07H vvH
n:
MIDI Channel Number
vv:
Value
Transmit Sent when part volume is used.
7