Playback Opetition and How to Copy apes on the VCR
1. A. Camcorder connected directly to
TV: Turn on the TV and tune it to
the video in p ut channel.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the "line" or
"camera mode". (If your VCR does
not have a "line" or "camera
mode", consult the VCR owner's
manual.) OPerate the TV as you
normally do! to see the signal
coming from the VCR.
2. Place the PO$ER switch in VCR to
turn on the camcorder. The POWER
indicator will light.
Press PLAY.
3.
If noise bars appear on the screen,
l
press TRACKfhG -or +.
Viewing What fhe Camcorder is Seeing (or Recording) $awMsw~~*~w~ *-av,**b:,sxwa
1. A. Camcorder connected directly to
TV: Turn on the TV, and tune it to
P
the video in
ut channel.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the "line" or
"camera mode". (If your VCR does
not have a "line" or "camera
mode", consult the VCR owner's
manual.) Operate the TV as you
normally do to see the signal
coming from the VCR.
Note: During record pause, you can see the camcorder's displays on the TV screen. Repeatedly
press
DISPLAY. Details are on pages 30-31.
During playback, use the playback
l
features on
page 45.
To copy what the camcorder is playing,
4.
place a blank cassette in the VCR, and
press the VCR's RECORD button.
Note: Press
to start camcorder
EDIT
playback when copying tapes to improve
picture reproduction. Make sure the
memory-stop feature is turned off (press
or the camcorder
COUNTER MEMORY)
will enter play pause when the counter
reaches M 0:OO:OO.
Press STOP when you are finished.
5 .
2 .
Place the POWER switch
in CAMERA.
Note: When the camcorder is used as a
camera, turn the TV's volume down to
prevent a high-pitched squeal caused by
feedback.
Press the thumb trigger to begin
recording. You can watch what the
camcorder is seeing (or recording) on
the TV screen.
47