Outdoor Unit Parts Replacement Methods - Toshiba MMY-MAP0806FT8P-TR Service Manual

12
OUTDOOR UNIT PARTS REPLACEMENT
METHODS
N . o P a t r o t b e e r p a l c e d
1 Cabinet
W o k r p o r c
WARNING
Wear a pair of gloves.
Otherwise, you will risk an injury involving a
replacement part or some other object.
1. Detachment
1) Stop the air conditioner operation, and turn off the
circuit breaker.
2) Remove the screws for the discharge cabinet.
(M5 × 16, 4 pcs.)
With a 12, 14HP unit, the discharge
cabinet side covers need to be removed.
Left and right: (M5 × 16, 2 pcs.) - 2 sets
Remove the two discharge cabinets for 16, 18,
20HP unit.
3) Remove the screws for the lower cabinet.
Front and rear: (M5 × 10, 7 pcs. for front and 6
pcs. for rear)
Remove the two front lower cabinets and two
rear lower cabinets for 16, 18, 20HP unit.
(M5 x 10, 13 pcs (Front) M5 x 10, 10 pcs (Rear)
4) Remove the screws for the service panel.
(M5 × 10, 2 pcs.)
5) Remove the screws for the suction cabinet.
Front and rear: (M5 × 10, 4 pcs. each)
In the case of a 12, 14HP unit: M5 × 10, 5
pcs. each
Remove the two front discharge cabines and two
rear discharge cabinets for 16, 18, 20HP unit.
(M5 x 10, 9 pcs (Front) M5 x 10, 9 pcs (Rear)
6) Remove the screws for the discharge cabinet side
cabinet.
Left and right: (M5 × 10, 6 pcs. each)
Remove the two front support plates and two
rear support plates for 16, 18, 20HP unit.
(M5 x 10, 6 pcs) - 2 set
2. Attachment
Carry out installation by following the detachment
procedure in reverse (6) 1)).
Be careful of the hooks provided on the suction
cabinet, service panel and lower cabinet.
e d u e r
Screws (4 corners)
5) Suction cabinet (front and rear)
4)
2) Discharge cabinet
5) Suction cabinet
− 269 −
R e m a k r s
2) Discharge cabinet Screws (4 corners)
Discharge cabinet
side cover
6) Side cabinet
(left and right)
Service panel
3) Lower cabinet (front and rear)
(front & rear)
3) Lower cabinet
(front & rear)
Hook
Service panel
6) Side cabinet
(left & right)