Pride PURSUIT Series Owner's Manual page 39

I X . C A R E A N D M A I N T E N A N C E
EXTERIOR SURFACES
Bumpers, tires, and trim can benefit from an occasional application of a rubber or vinyl conditioner.
WARN I N G! Do not use a rubbe r or vinyl c ondit ione r on t he sc oot e r's vinyl se a t or t ire
t re a d, a s t his m a y c a use t he m t o be c om e da nge rously slippe ry.
CLEANING AND DISINFECTION
Use a damp cloth and mild, non-abrasive cleanser to clean the plastic and metal parts of your scooter.
Avoid using products that may scratch the surface of your scooter.
If necessary, clean your product with an approved disinfectant. Make sure the disinfectant is safe for
use on your product before application.
WARN I N G! Follow a ll sa fe t y inst ruc t ions for t he prope r use of t he disinfe c t a nt a nd/or
c le a ning a ge nt be fore a pplying it t o your produc t . Fa ilure t o c om ply m a y re sult in sk in
irrit a t ion or pre m a t ure de t e riora t ion of upholst e ry a nd/or sc oot e r finishe s.
BATTERY TERMINAL CONNECTIONS
Make certain that the terminal connections remain tight and uncorroded.
The batteries must sit flat in the battery wells.
The battery terminals should face away from the seat post.
WIRING HARNESSES
Regularly check all wiring connections.
Regularly check all wiring insulation, including the charger power cord, for wear or damage.
Have your authorized Pride Provider repair or replace any damaged connector, connection, or insula-
tion that you find before using your scooter again.
PROH I BI T ED! Eve n t hough t he sc oot e r ha s pa sse d t he ne c e ssa ry t e st ing re quire m e nt s
for ingre ss of liquids, you should k e e p e le c t ric a l c onne c t ions a w a y from sourc e s of da m p-
ne ss, inc luding dire c t e x posure t o w a t e r or bodily fluids a nd inc ont ine nc e . Che c k e le c t ri-
c a l c om pone nt s fre que nt ly for signs of c orrosion a nd re pla c e a s ne c e ssa ry.
ABS PLASTIC SHROUDS
The front tiller shroud, front shroud, and the rear shroud are formed from durable ABS plastic and are
coated with an advanced formula urethane paint.
A light application of car wax will help the shrouds retain their high gloss.
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
These items are all prelubricated, sealed, and require no subsequent lubrication.
MOTOR BRUSHES
The motor brushes are housed inside of the motor transaxle/assembly. They should be inspected periodi-
cally for wear by your authorized Pride Provider.
CONSOLE, CHARGER, AND REAR ELECTRONICS
Keep these areas free of moisture.
Allow these areas to dry thoroughly if they have been exposed to moisture before operating your
scooter again.
Pursuit www.pridemobility.com
39