Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dinstar C62U
Summary of Contents for Dinstar C62U
- Page 1 Quick Start Guide C62U/C62UP Business IP Phone Thanks for Choosing Dinstar’s IP phone! Please read this guide carefully before using this product. If you need any technical support , please contact us Tel: +86 755 61919966 Email: support@dinstar.com Website: www.dinstar.com...
-
Page 2: Packaging Contents
Cable (Optional) Note: The C62UP IP phone is powered by PoE, the power adapter will not be provided. Hardware Component Instructions The main hardware components of the C62U/C62UP IP phone are the LCD screen and the keypad. Hookswitch LCD Screen... -
Page 3: Assembling The Ip Phone
Assembling the IP Phone Attach the stand to the IP Phone, as shown below: Connect the handle, headset, PC and power supply as shown in the figure below: Note: PC connection and Expansion Module connection are optional. -
Page 4: Configure The Ip Phone
Startup After the IP phone is powered on and connected to network, it will start up automatically. And then the IP phone is ready for use. You can configure the phone via the phone’s user interface or the web user interface. Configure the IP Phone There are two ways to configure the IP Phone: ·... -
Page 5: Basic Call Features
Configure via the Web interface on your PC Accessing the web interface on PC Press the key when the phone is idle to obtain the IP address of the phone. Open a web browser on your PC, enter the IP address into the address bar(e.g. - Page 6 Terminate a call Using the handset Hand up the handset or press the End soft key . Using the speakerphone Press or the End soft key. Using the Headset Press the End soft key. Redial Press the History soft key,then press to select the desired entry, and then press the Send soft key.
- Page 7 Call Conference (1) Press or the New soft key to make a new call to a third party during an active call. (2) Press again or the Conf soft key to start a three-way conference after the third party has answered the call. (3) Press the the Conf soft key, enter the number, then press the Send soft key to call the fourth party.
- Page 8 Customize the IP Phone Call History (1) Press the History soft key when the phone is idle, press to scroll through the call list. (2) Select an entry from the list, and you can do the following: Press the Dial soft key to place a call to this entry; Press the Delete soft key to delete the entry from the list.
Need help?
Do you have a question about the C62U and is the answer not in the manual?
Questions and answers