Bissell POWERLIFTER 2259 Series User Manual page 5

Assembly
The only tool you will need to assemble your vacuum is a
Phillips screwdriver.
1 2
Place the
upper handle
onto the base
and push it
down. Then
attach the
handle with
the 2 screws
taped to the
handle in a
Insert the extension wand
plastic bag.
base and turn it to the right
to lock in place.
4 5
Wrap hose up and around
the hose wrap on the
Dusting
handle. Slide end of hose
Brush Tool
into vacuum base.
NOTE: Flexible Crevice Tool does not store on board.
3
Insert the hose end into the
back of the vacuum and
twist right to lock in place.
Now, put your accessory tools on the vacuum
and you're ready to go!
Upholstery
TurboBrush
Tool Tool
www.BISSELL.ca
Extension
Wand
5