Table of Contents
Advertisement
15. DDC/CI: Allows the monitor settings to be set through the software on the PC.
------------------------------------------------------------------------------------------------------
Note:
• DDC/CI, short for Display Data Channel/Command Interface, which allows monitor
controls to be sent via software.
• Widget tools must settings the DDC/CI to "On" can to work properly.
16. HDMI Black level: Select to set HDMI black level.
17. Quick Start Mode：Select Off or On. Turn on to speed up boot speed.
18. USB Port Select：Default is C-Type, Can select the USB Port from B-Type and
C-Type.
19. USB 3.0 ： Default is "On". It can control determine the USB bandwidth. When USB 3.0
= "Off", DP ALT support to 3840x2160-144Hz. When USB 3.0 = "On", DP ALT support
timing by source.
20. HMDI2.1：Default is "On. HDMI1 & 2 Resolution can support 3840x2160-144Hz.
HDMI2.1 = Off, HDMI1 & 2 Resolution can support 3840x2160-60Hz.
21. Power-off USB charge: Turn On or Off. On: DC off/Saving mode can to electrify for
USB port. Off: DC off/Saving mode can't to electrify for USB port.
------------------------------------------------------------------------------------------------------
Note:
Power-off USB charge is set to off by default. Therefore, the sleep mode cannot
be resumed under the USB Type-C input. The user needs to change the Power-off USB to
on.
27
CG437K User Guide English
Advertisement
Table of Contents
