Monitor Introduction - Acer Cg437K User Manual

Monitor introduction

User Controls
5
External controls
1 Power button Power button turns the monitor on/off. Blue indicates power on. In the
2 Function key
/
3 Function key
/
4 Function key
X
/
5 Function key
/
Note: Acer monitor is purposed for video and visual display of information obtained from electronic devices.
AdaptiveSync:
It can allow a AdaptiveSync supported graphics source to dynamically adjust display
refresh rate based on typical content frame rates for power efficient, virtually stutter
free and low-latency display update.
KVM switch:
The built-in KVM switch allows you to control up to 2 computers from a single set of
keyboard and mouse connected to the monitor.
CG437K User Guide English
4 3 2 1
power saving mode, the blue power saving lamp and the breathing
lamp can be setting according to the LED Control, anther OSD Locked
mode is a blue breathing lamp.
a. Press to view Hot Key Menu, Press again to enter hotkey 1 function
(default is Modes, user can redefine).
b. When the Main Menu is active, press this key to view the basic
information for your monitor and current input or reset the custom
color settings to the factory defaults.
a. Press to view Hot Key Menu. Press again to enter hotkey 2 function
(default is Brightness, user can redefine).
b. When the Main Menu is active, press this button to select Modes
menu.
a. Press to view Hot Key Menu. Press again to enter Input select
function.
b. When the Main Menu is active, this button will quit the OSD.
a. Press to view Hot Key Menu. Press again to enter Main Menu page.
b. The single toggle button on the backside of the Display bezel
operates like a joystick. To move the cursor, simply toggle the button
in four directions. Press the button to select desired option. Red
indicates operable. Gray indicates inoperable.
2