Table of Contents
Advertisement
Configuring a dynamic IP/PPPoE network connection
To configure a dynamic IP/PPPoE network connection:
Launch Network and Sharing Center in either of these two ways:
1.
a)
From the taskbar, right-click
b)
From the Start menu, click Settings > Network & Internet > Ethernet > Network and
Sharing Center.
From the Open Network and Sharing Center screen, click Change Adapter settings.
2.
3.
Right-click on your LAN and select
Properties.
Click Internet Protocol Version 4(TCP/
4.
IPv4) and click Properties.
5.
Click Obtain an IP address automatically
and click OK.
Continue to the next steps if you are using PPPoE connection.
ASUS K31CLG/A31CLG/F31CLG
, then click Open Network and Sharing Center.
31
Advertisement
Table of Contents
