Next HARTFORD 860904 Assembly Instructions Manual

Next HARTFORD 860904 Assembly Instructions Manual

T tlshele

Advertisement

Quick Links

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

Tools Needed

Helpline

If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: 0844 844 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is
found to be faulty. Should you need to return the unassembled product, please repack in the original packaging.

IMPORTANT

• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.

PRODUCT INFORMATION

• Made from Pine with NC lacquer finish.
• Made in China.
• Natural features ensure that each piece is individual. Every effort is made to ensure colour continuity between
pieces, however this is a natural product, slight colour variations and natural grain markings may occur.

CARE INSTRUCTIONS

• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down the lacquer finish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent
scratching or damage.
• Do not put hot dishes directly on the surfaces of the item.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration
or warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if
necessary.
860904 HARTFORD T TLSHELE
860904 HARTFORD T TLSHELE
ASSEMBLY INSTRUCTIONS.
Page 1 of 7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HARTFORD 860904 and is the answer not in the manual?

Questions and answers

Summary of Contents for Next HARTFORD 860904

  • Page 1 860904 HARTFORD T TLSHELE 860904 HARTFORD T TLSHELE ASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY. Tools Needed Helpline If you have any problems with this product or require any replacement fittings please contact Customer Services Tel: 0844 844 8999 Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be faulty.
  • Page 2 FITTINGS PARTS Page 2 of 7...
  • Page 3 STEP ONE 1. Insert 2 x wood dowels (B) to top of side rail (2) 2. Insert 2 x wood dowels (B) to top of side rail (1) 3. Insert 12 x wood dowels (B) to shelf (4), (5) & (6). Page 3 of 7...
  • Page 4 STEP TWO 1. Attach shelf (4),(5) & (6) to side rail (1) and secured by 8 x screws(A), tighten with a screw driver. 2. Attached side rail (2) to assembled unit and secured by 8 x screws(A), tighten with a screw driver.
  • Page 5 STEP FOUR 1. Secured top panel(3) to assembled unit by 4 x screws (A), tighten with a screw driver. STEP FIVE 1. Attach 1 x wall attachment straps (C) to the back of the top panel with 1 x washer (D) and 1 x screw (E).
  • Page 6 STEP SIX 1. Move the item into position and attach the end of the strap to the wall with the approciate screw, washer and wall plug for your wall type. 2. WARNING: Always ensure the area to be drilled is free from hidden electrical wires, water and gas pipes.
  • Page 7 Next Retail Ltd, Desford Road, Enderby, Leicester, LE19 4AT Page 7 of 7...

Table of Contents