RUSTA 906512150101 Manual page 4

ENG
ASSEMBLY
The packaging includes 4 x support legs which are easily screwed on with a screwdriver
(not included) before the decorative fireplace can be used. Make sure that the screws are
properly tightened.
USE
The decorative fireplace provides efficient heat and does not require ventilation.
CONTROL PANEL
• The control panel is located on the right side of the fireplace.
• Set the switch to the "O/I" position for the flame effect.
• Press the switch and button "I" for low heat.
• Press the switch and button "II" for high heat.
• The fireplace is equipped with overheating protection. If the
fireplace becomes too hot, it switches off automatically.
• Reset it by pulling the plug out of the electrical outlet and waiting 5 minutes.
CLEANING
• Turn off the fireplace and pull the plug out of the electrical outlet.
• Clean the ventilation openings with a feather duster or vacuum cleaner.
• The surface of the fireplace is cleaned with a damp cloth or feather duster. Do not use
any corrosive cleaners, sprays or other materials which can damage the surface.
4