Subscribe to Our Youtube Channel
Related Manuals for Quatech PCD-B/UPCI-E
Summary of Contents for Quatech PCD-B/UPCI-E
- Page 1 PCD-B/PCI-ST User Manual Ver. 2.00 All brand names and trademarks are properties of their respective owners. May/07...
- Page 2 Features Compliant with PCI local bus specification 2.3 Compliant with PC card standard release 8.1 specification Works with various types of 16 or 32-bit CardBus PC Cards Advanced Configuration Specification 2.0 Compliant Bridge function between PCI bus and CardBus Supports PC Card or CardBus with Hot Insertion and Removal Support Windows®...
- Page 3 Hardware Layout Note: The ejector lever can be placed in two positions, locked and unlocked. When inserting a PC Card, the lever can be in either position. However, the lever must be in the unlocked position to eject a PC Card. To unlock the lever, push it until you hear a click then release it.
- Page 4 General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed. Turn OFF the power to your computer. Unplug the power cord and remove your computer’s cover. Remove the slot bracket from an available PCI slot.
- Page 5 To Verify Driver Installation Check Device Manager to verify successful driver installation. Look for the following. Windows® 2000/XP/Server 2003/Vista: Double click PCMCIA Adapters: -Generic CardBus Controller should be displayed. If this entry doesn’t appear, shut down your system and make sure the PCI board is properly seated.
Need help?
Do you have a question about the PCD-B/UPCI-E and is the answer not in the manual?
Questions and answers