Related Manuals for Quatech DS-PCI-100
Summary of Contents for Quatech DS-PCI-100
-
Page 1: User Manual
DS-PCI-100 User Manual Ver. 2.00 All brand names and trademarks are properties of their respective owners. MN2000000084 May/07... -
Page 2: Features And Benefits
Features and Benefits Features Connectors Package Contents 1 x DS-PCI-100 Card 1 x Driver CD System Requirements Windows® 2000/XP/Server 2003/Vista Available PCI slot May/07 Supports 2 x 16550 Fast UART serial Ports Serial data transfer rate up to 115200bps Easy Plug and Play Automatically selects IRQ &... -
Page 3: Hardware Installation
Hardware Installation Turn Off the power to your computer. Unplug the power cord and remove your computer’s cover. Remove the slot bracket from an available PCI slot. To install the card, carefully align the card’s bus connector with the selected PCI slot on the motherboard. Push the board down firmly. - Page 4 D:\Drivers\PCI\DS,QS,HS-PCI-100\2000, (Change D: to match your CD-ROM driver letter) Click Next and Finish. Restart Windows to complete the installation. For Windows® XP At the Found New Hardware Wizard, select Install from a list or specific location (Advanced), then click Next. Insert the Driver CD, check Include this location in the search, uncheck the other box, type in the following path D:\Drivers\PCI\DS,QS,HS-PCI-100\XP,...
- Page 5 Insert the Driver CD, check Include this location in the search, uncheck the other box, type in the following path D:\Drivers\PCI\DS,QS,HS-PCI-100\2003, (Change D: to match your CD-ROM drive letter) If the Hardware Installation window pops up, click Continue Anyway, then Finish. Our driver has been thoroughly tested for stability and compatibility.
- Page 6 signed, select the option Install this driver software anyway. Click on Close to complete the driver installation. To Verify Windows® Driver Installation Right click My Computer, then click Manage. Click Device Manager. Click on the +(plus sign) in front of Ports(COM & LPT), two MosChip PCI Serial Port …...
- Page 7 select a COM port that is not in use, then click OK. Click OK, then close Device Manager to save the changes. Follow steps 1-4 again to change the other serial port number if needed. May/07 MN2000000084...
Need help?
Do you have a question about the DS-PCI-100 and is the answer not in the manual?
Questions and answers