Table of Contents
Advertisement
disturbance
High spin speed
number is not
reached.
Spin program
does not start.
Rustling, zi-
screeching sound.
Loud noises
end of skidding.
Rattling noises,
Rattling in the drain
pump.
Slurping, rhythmic
nice sucking noise.
Cause and troubleshooting
The unbalance control system compensates for unbalance
by reducing the spin speed.
Redistribute the laundry in the drum.
▶
Notice: Place large and small items of laundry
together in the drum. Laundry items of different sizes
are better distributed during spinning.
Start the program Fling.
▶
The drain pipe or water drainage hose is blocked.
Clean the drain pipe and water drain hose.
▶
The drain pipe or water drainage hose is kinked or
pinched.
Make sure the drain pipe and water drain hose are
▶
not kinked or pinched.
The unbalance control system has stopped spinning
due to uneven distribution of the laundry.
Redistribute the laundry in the drum.
▶
Notice: Place large and small items of laundry
together in the drum. Laundry items of different sizes
are better distributed during spinning.
Start the program Fling.
▶
Water is flushed into the detergent drawer under
pressure.
Not a fault - normal operating noise.
▶
Device is not aligned correctly.
Align the device
▶
The feet of the device are not fixed.
Fix the device feet. Align the device
▶
Transport locks are not removed.
Remove the transport locks
▶
Foreign matter has got into the drain pump.
→
"Cleaning the drain pump ", page 40
▶
The detergent solution pump is active, the detergent solution is
pumped out.
Not a fault - normal operating noise.
▶
Troubleshooting de
49
Advertisement
Table of Contents
