STEP 3 Installing the anti-slip pad
STEP 4 Adjust the levelling feet
WW3000TM_8-9KG_Vietnam_8C104-000556_EN.indd 21
WW3000TM_8-9KG_Vietnam_8C104-000556_EN.indd 21
1.
Completely clean the bottoms of the
adjustable legs and wipe away any dust and
oil.
2. Mark the locations of the adjustable front legs
of the washing machine where the anti-slip
pads should be installed.
3. Attach the anti-slip pad by tilting or moving
the washing machine. When you attach the
pad, remove the plastic film from the pad and
attach the sticker side of the pad to the floor
so that the rough side is facing upward. You
should not attach the sticker side of the pad
to an adjustable leg.
4. After installing the washing machine and
anti-slip pad, check if the adjustable legs are
level again.
1.
Gently slide the washing machine into
position. Excessive force may damage the
levelling feet.
2. Level the washing machine by manually
adjusting the levelling feet.
3. When levelling is complete, tighten the nuts
using the spanner.
English 21
2021-01-15
2021-01-15
4:09:53
4:09:53