Acura MDX 2009 Manual page 444

Hide thumbs Also See for MDX 2009:

Table of Contents

Checking and Replacing Fuses

If something electrical in your

vehicle stops working, the first thing

you should check for is a blown fuse.

Determine from the chart on pages

443, 444, and 445, or the diagram on

the fuse box lid, which fuse or fuses

control that device. Check those

fuses first, but check all the fuses

before deciding that a blown fuse is

the cause. Replace any blown fuses,

and check if the device works.

1. Turn the ignition switch to the

LOCK (0) position. Make sure the

headlights and all other

accessories are off.

2. Remove the cover from the fuse

Table Of Contents

3. Check each of the large fuses in

the under-hood fuse boxes by

looking through the top at the wire

inside. Removing these fuses

requires a Phillips-head

screwdriver.

Chapters

Table of Contents