Scope Of Delivery; Intended Use - Hyundai WR8020-1050-P-360H1 Manual

01. Handle
02. Power cord
03. Frame tubing
04. lower bar
05. Tapping screw
06. Machine frame
07. Blade roller

4. SCOPE OF DELIVERY

1
10
08
09
08
09
04
04
05
03
17
● 1x body of the machine (06) incl. handle (01)
● 2x cutting roller pre-assembled (07)
● 2x lower bar (04)
● 1x Frame tubing (03)
● 2x tapping screw pre-assembled (05)
● 4x Carriage polt (08)
● 4x Wing nut (09)
● 2x Safety release catch (11)
● 2x pre-assembled locking nut M8 (13)
● 2x screw M8 pre-assembled (14)
● 1x Manual
08. Carriage bolt
09. Wing nut
10. Cable clip
11. Safety release catch
12. On/Off switch
13. Nut M8
14. Screw M8
15. Drive shaft
01
02
07
16
E NGLISH
● Open the packaging and remove the device
carefully.
● Remove the packaging material as well as the
packaging and transport bracing (if available).
● Check that the delivery is complete.
● Check the device and accessory parts for trans
ort damage. If there is any damage, please
ontact customer Service in time and we will
provide you with a satisfactory solution.
ATTE NTI ON!
The device and paskaging materials are
not tovs!
Children must not be allowed to play with
plasti bags, film and small parts!
There is arisk of swalowing and
suffocation!

5. INTENDED USE

The machine is designed for digging over beds and
fields. Be sure to observe the restrictions in the
additional safety instructions.
The instructions for use contain valuable
information on operating, maintenance and
servicing conditions.
For safety reasons, the device must not be used
as a drive unit for other work tools or toolkits of any
kind.
The equipment is allowed to be used only for its
prescribed purpose.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications.
03
20