Samsung SM-G996B Repair Manual page 68

2
Before the heat cools with the heating bag applied, remove the adhesive bonding
between the front camera and the display module using the ejection pin.
Be careful not to damage the front camera and near components.
•
As the adhesive securing the camera is very strong, work slowly.
•
Be careful not to touch the ejection pin on the side of the camera.
•
If you have trouble removing the adhesive, heat the microwaveable heating
bag additionally, and apply it to the front camera module to further soften the
adhesive. When reheating, it should be heated no longer than 30 seconds.
3
Remove the front camera carefully by hand, and leave the camera lens facing up.
Be careful not to damage the front camera and near components.
After you finish disassembling, refer to
reassemble.
Disassembly and Assembly
Front Camera Assembly for how to
68