Advertisement
Mounting to wall/ceiling (masonry):
1.
Drill pilot holes and insert the supplied wall anchors first.
2.
Place the bracket against the surface, in line with the wall anchors, and secure it in
place with the supplied screws.
3.
Attach the camera to the bracket.
Mounting to wall/ceiling (timber / dry wall):
1.
If not drilling into timber studs, drill pilot holes and insert the supplied wall anchors first
2.
Place the bracket against the surface, in line with the wall anchors (if used) and secure
it in place with the supplied screws.
3.
Attach the camera to the bracket.
Alternatively, the camera can be placed on a clean, horizontal, flat surface.
8
Advertisement
