Advertisement
General Settings
Brightness:
1.
Press the Menu button, select
2.
Use the UP and DOWN directional buttons to adjust brightness.
Time:
1.
Press Menu button and select
2.
Use directional buttons to set the date, time and time displaying mode.
Language:
1.
Press Menu button and select
2.
Use directional buttons to select the desired language.
Sleep mode:
This option controls the length of time before the monitor automatically turns off after no
user input or notifications. The monitor will turn back on when a button is pressed or after an
alarm is triggered.
1.
Press Menu button on the monitor and select
2.
Select between; 1, 5, 10, 30 and 60 minutes or off.
Status indicator:
That status indicator on the camera can be turned off if you think it will disturb your baby.
Press Menu button and select
Light > Status light.
SD card:
1.
Press the Menu button and select
capacity and remaining capacity of your SD card.
2.
If desired, you can also format the SD card according to your needs. Note: Ensure to
back up any important data beforehand.
Low battery:
When the monitor is low on battery, the low battery alarm will appear on the screen.
1.
Connect the USB cable to the power input port on the monitor and connect the other
end into the power adapter.
2.
Plug the power adapter into an electrical outlet and turn it on, the charging indicator
will turn orange.
3.
When the battery is fully charged the charging indicator will turn green.
and press OK to enter the interface.
> Time setting.
> Language.
>
or press the Menu button and select
> SD card management to view the total
> Sleep mode.
>
25
Advertisement
