Multiview Faqs - Philips 345E2 User Manual

8. Troubleshooting & FAQs

8.3 Multiview FAQs

Can I enlarge the PIP sub
Q1:
window?
Ans.: Yes, there are 3 sizes to select:
[Small], [Middle], [Large]. You
can press
Select your preferred [PIP Size]
option from the [PIP / PBP] main
menu.
How to listen to Audio, independent of
video?
Ans.: Normally the audio source is
linked to the main picture source.
If you want to change audio-
source input , you can press
to enter OSD menu. Select your
preferred [Audio Source] option
from the [Audio] main menu.
Please note that the next time you
turn on your display, the display
will by default select the audio
source you chose last time. In case
you want to change it again, you
need to go through the above
steps to select your new preferred
audio source, which then will
become the "default" mode.
Why the sub-windows flickers when I
enable PIP/PBP.
Ans: It's because the sub-windows
video source is interlace timing
(i-timing), please change sub-
window signal source to be
progressive timing (P-timing).
to enter OSD menu.
28