Summary of Contents for Colebrook Bosson Saunders WISHBONE
Page 1
18 Bowden Street Kennington London SE11 4DS tel: +44 (0)20 7587 5283 fax: +44 (0)20 7587 5275 e.mail: sales@cbsproducts.co.uk www.cbs-products.com WISHBONE INSTRUCTION issue No.1 WARNING • Do not use this product for any purpose other than that for which it was designed.
Page 2
DO NOT attach the monitor before assembling post. Clamp neoprene pad DO NOT attach the monitor before assembling post. •Small clamp (WSH/SCLM38, WSH/SCLM63) to only be used with WSH/003 and Tool bar. Post Use the special tool for tightening the Wishbone post. Extension Extension stud...
Page 3
Quick release movement joint Attaching arm to post Position O-ring at desired height. Thread Wishbone over post. O-Ring Attaching arm to toolbar Remove the monitor from the arm when Ensure the screw or pig tail is fixing or adjusting.
Page 4
Assembling back to back bracket Ensure the top plate has a pin. Back to back bracket Assembling toolbar bracket and slat wall or wall mounting bracket Toolbar bracket Slat wall & wall mounting bracket Screws for wall mounting are NOT provided.
Page 5
Wishbone standard system C-piece slat wall & wall bracket with post C-piece extended slat wall & wall bracket with post Wishbone Forearm slat wall & wall bracket with post Wishbone slat wall & wall bracket with post Forearm post Extension slat wall & wall bracket with post...
Need help?
Do you have a question about the WISHBONE and is the answer not in the manual?
Questions and answers