Daikin FTXS42K2V1B Operation Manual page 36

Inverter
Hide thumbs Also See for FTXS42K2V1B:
Table of Contents

Advertisement

Care and Cleaning
Check the units
Check that the base, stand and other fi ttings of the outdoor unit are not decayed or corroded.
Check that nothing blocks the air inlets and the outlets of the indoor unit and the outdoor unit.
Check that the drain comes smoothly out of the drain hose during COOL or DRY operation.
• If no drain water is seen, water may be leaking from the indoor unit. Stop operation and consult the service shop if this is the
case.
Before a long idle period
1.
Operate the FAN only for several hours on a fi ne day to dry
out the inside.
• Press
• Press
and start the operation.
2.
After operation stops, turn off the breaker for the room air
conditioner.
3.
Clean the air fi lters and set them again.
4.
Take out batteries from the remote controller.
• When a multi outdoor unit is connected, make sure the HEAT operation is not used at the other room before you use
the FAN operation.
We recommend periodical maintenance
• In certain operating conditions, the inside of the air conditioner may get foul after several seasons of use, resulting in poor
performance. It is recommended to have periodical maintenance by a specialist aside from regular cleaning by the user.
• For specialist maintenance, contact the service shop where you bought the air conditioner.
• The maintenance cost must be born by the user.
Important information regarding the refrigerant used
This product contains fluorinated greenhouse gases. Do not vent gases into the atmosphere.
R410A
Refrigerant type:
2087.5
GWP
value:
(1)
GWP = global warming potential
(1)
Periodical inspections for refrigerant leaks may be required depending on European or local legislation.
Please contact your local dealer for more information.
NOTICE regarding tCO
In Europe, the greenhouse gas emissions of the total refrigerant charge in the system (expressed as tonnes CO
is used to determine the maintenance intervals. Follow the applicable legislation.
Formula to calculate the greenhouse gas emissions:
GWP value of the refrigerant × Total refrigerant charge [in kg] / 1000
35
and select "
" operation.
Page 29
eq
2
-equivalent)
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents