1. Manuals
  2. Brands
  3. ADIC Manuals
  4. Racks & Stands
  5. FastStor 22
  6. Install manual

ADIC FastStor 22 Install Manual

Quantum faststor 22: install guide
Hide thumbs

Advertisement

Table of Contents

Fast
FastStor 22
Rackmount Installation Instructions
Document Number 62-2202-01 Rev A
© Copyright ADIC July 1999
Advanced Digital Information Corporation
Telephone: (425) 881-8004
Fax: (425) 881-2296
Customer Assistance: (425) 883-HELP
World-wide web: http://www.adic.com
BBS: (425) 883-3211
Shipping Address: 11431 Willows Road NE
Redmond, WA 98052
Mailing Address: PO Box 97057
Redmond, WA 98073-9757

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FastStor 22 and is the answer not in the manual?

Questions and answers

Related Manuals for ADIC FastStor 22

Summary of Contents for ADIC FastStor 22

  • Page 1 Fast FastStor 22 Rackmount Installation Instructions Document Number 62-2202-01 Rev A © Copyright ADIC July 1999 Advanced Digital Information Corporation Telephone: (425) 881-8004 Fax: (425) 881-2296 Customer Assistance: (425) 883-HELP World-wide web: http://www.adic.com BBS: (425) 883-3211 Shipping Address: 11431 Willows Road NE...

  • Page 2: Table Of Contents

    Unpacking the Rackmount Kit... 2 Installing the Kit in Your Rack ... 3 Installing the Rear Rackmounting Brackets...3 Installing the Rackmounting Shelf...4 Preparing the FastStor 22 for Rackmounting ... 5 Mounting Your FastStor 22 in Your Rack ... 5 FastStor Rackmount Installation Instructions...

  • Page 3: Precautions

    Precautions You must consider the following precautions when installing a FastStor 22 unit in a rack system: 1. Maximum recommended ambient temperature is 40º C. Internal temperature of rack should be considered for continued safe operation. 2. Do not block the product rear vents or otherwise restrict airflow to these vents when unit is installed in rack.

  • Page 4: Rackmounting Your Faststor 22

    Rackmounting Your FastStor 22 These instructions provide detailed descriptions of the steps you must perform to install your FastStor 22 in your rack. You’ll need a work surface to assemble the parts on before installing your FastStor 22 in the rack.

  • Page 5: Installing The Kit In Your Rack

    If the holes are square, use the cage nuts supplied in the kit to mount the kit components. Refer to the following illustration. The first step in rackmounting your FastStor 22 is to install the rear brackets to your racks rear vertical rails. Front Vertical Rails Mount the rear brackets to your racks rear vertical rails using four M5, panhead, phillips screws, four finishing washers, and four cage or panel nuts.

  • Page 6: Installing The Rackmounting Shelf

    Note: Be sure to align the mounting holes on the shelf front flanges at the same vertical height as the rear brackets Secure the shelf to the rear brackets using four M5 screws. The next step in the process is to prepare your FastStor 22 for mounting into your rack. Shelf Guide Pin Shelf...

  • Page 7: Preparing The Faststor 22 For Rackmounting

    3. Secure the assembly to your rack using the two thumb screws and two washers. Install the AC line cord, SCSI cable and SCSI terminator to the rear of the FastStor 22 by following the instructions in Chapter 2 — Hardware Installation of the FastStor 22Installation and Operating Guide.

Table of Contents