Advertisement
clear of the discharge opening at all time.
y
Never pick up or carry the product while it is running.
of
Stop the mower motor and remove safety start key, make sure
that all moving parts have come to a complete stop:
d
whenever you leave the product unattended (including disposal
of grass clippings)
before cleaning a blockage or unclogging discharge chute
before checking, cleaning or working on the product
after striking a foreign object; inspect the product for damage
d
and make repairs as necessary before restarting and operating
the product
before removing the grass catcher or opening the grass
discharge chute cover
If the product starts to vibrate abnormally (check immediately):
e
inspect for damage, particularly the blades
replace or repair any damaged parts
e
check for and tighten any loose parts
d
Avoid holes, ruts, bumps, rocks, property stakes, or other
or
hidden objects. Uneven terrain could cause a slip-and-fall
accident.
e
Always ensure the motor control cable is never trapped,
pinched, or otherwise damaged during assembly or when
folding the handle.
ADDITIONAL BATTERY SAFETY WARNINGS
.
product damage due to a short circuit, never immerse your
s
certain industrial chemicals, and bleach or bleach-containing
products, etc., can cause a short circuit.
d
or
OVERLOAD, OVERHEAT, AND TILT PROTECTION
g
The product has an overload protection device. When overloading
is detected, the product will automatically switch off. If the overload
ar
protector is actuated, the on-off lever must be released. Press the
start button to restart the product.
n,
The product has overheat protection. Excessive temperatures will
cause the battery to stop powering the product. Feel the battery
pack; if it is too warm, allow it to cool down before resuming
e
operation. If the product still does not work, recharge the battery.
NOTE: The battery pack LED indicator will not work if the battery
protection feature has caused the battery pack to stop powering
y.
the product. Release the on-off lever or remove the battery pack
st
from the product and the battery pack LED indicator will resume
er
normal function.
The product also has a tilt protection function. If the product is tilted
o
beyond 40°, for about 7 seconds, the product will stop. The product
n
will not function if the tilt angle limit is exceeded or if the product is
a
in the vertical storage position.
or
RESIDUAL RISKS
s
Even when the product is used as prescribed, it is still impossible
or
to completely eliminate certain residual risk factors. The following
s
attention to avoid the following:
d
Injury caused by vibration. Always use the right tool for the
of
n
p
job. Use designated handles and restrict working time and
exposure.
Exposure to noise can cause hearing injury. Wear ear protection
and limit exposure.
Contact with the blades.
Injury from thrown objects.
RISK REDUCTION
It has been reported that vibrations from handheld tools may
contribute to a condition called Raynaud's Syndrome. Symptoms
usually apparent upon exposure to cold. Hereditary factors,
exposure to cold and dampness, diet, smoking, and work practices
are all thought to contribute to the development of these symptoms.
There are measures that can be taken by the operator to possibly
reduce the effects of vibration:
Keep your body warm in cold weather. When operating the
product wear gloves to keep the hands and wrists warm.
After each period of operation, exercise to increase blood
circulation.
Take frequent work breaks. Limit the amount of exposure per
day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor.
WARNING! Injuries may be caused, or aggravated, by
prolonged use of a tool. When using any tool for prolonged
periods, ensure you take regular breaks.
TRANSPORTATION AND STORAGE
Stop the product, remove the safety start key, and the battery. Make
sure that all moving parts have come to a complete stop. Allow the
product to cool down before storing or transporting.
Clean all foreign material from the product. Store it in a cool, dry,
and well-ventilated place that is inaccessible to children. Keep away
from corrosive agents such as garden chemicals and de-icing salts.
Do not store outdoors.
For transportation, remove safety start key, secure the product
against movement or falling to prevent injury to persons or damage
to the product.
WARNING! Use extreme caution when lifting or tilting the
product for maintenance, cleaning, storage, or transportation.
The blade is sharp. Keep all body parts away from the blade while
it is exposed.
MAINTENANCE
WARNING! Use only original manufacturer's replacement
parts, accessories and attachments. Failure to do so can cause
injury, poor performance and may void your warranty.
For service, bring the product to an authorised service centre for
repair. When servicing, use only original replacement parts.
Remove the safety start key and the battery before any cleaning or
maintenance task.
You may make adjustments and repairs described here. For other
repairs, contact the authorised service centre.
Check the grass catcher frequently for wear or deterioration.
33
33
Advertisement
