Page 2
mportant! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modifications.
Page 12
INSTALLING AND REMOVING THE BATTERY PACKS NOTE: The mower can run on either 1 battery pack or 2 battery packs for extended runtime. click...
Page 13
INSTALLING AND REMOVING THE SAFETY NOTE: The mower does not turn on unless the safety key is installed. The arrow on the safety key points to which battery pack the mower draws power from.
Page 14
START OPERATING THE PRODUCT Max.15˚ STOP...
Page 19
INSTALLING THE GRASS CATCHER To assemble the grass catcher, insert the grass catcher frame into the bag, making sure that the top handle stays outside of the bag. Insert the grass catcher bag through the frame, and then clip the bag over the frame.
Page 30
NOTE: Always properly dispose of a used blade. NOTE: For the replacment blade part number, see the specifications table. NOTE: Tighten the blade bolt to a torque of 35- 40 Nm. Blade bolt tightening torque (35~40 Nm)
ALM58B/ALM58LI402 TECHNICAL DATA CORDLESS LAWNMOWER be a prod Rated voltage 58V d.c. Stay Width of cut 46 cm Height of cut 18 - 75 mm or u Rated input 1200 W No-load speed 2800/min pers Weight (without battery pack) 25.3 kg...
regulations may restrict the age of the operator. Children should pack. be adequately supervised to ensure that they do not play with the A battery pack must be recharged only with the charger specified by product. d.c. the manufacturer. Using a charger with an incompatible battery pack Stay alert, watch what you are doing, and use common sense when may create a risk of fire.
Page 36
speed for which it was designed. Stop the blade when crossing gravel surfaces. NOTE: The battery pack LED indicator does not work if the battery protection feature has caused the battery pack to stop powering the prod Do not pull the product backward unless absolutely necessary. If you product.
■ Check and carefully clear the grass discharge chute from blockages. tery WARNING! Use extreme caution when lifting or tilting the ■ Turn the product on its side, then check its underside and the area product for maintenance, cleaning, storage, or transportation. The around the blade.
SYMBOLS IN THIS MANUAL Parts or accessories sold separately Note Warning The following signal words and meanings are intended to explain the levels of risk associated with this product. DANGER Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
Page 40
Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC, 3149, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand AEG is a registered trade mark used under 961087286-03 license from AB Electrolux (publ)