Advertisement

ALM58SP24
A58LMWSP282
ALM58SP
Original instructions

Advertisement

Table of Contents
loading

Summary of Contents for AEG A58LMWSP282

  • Page 1 ALM58SP24 A58LMWSP282 ALM58SP Original instructions...
  • Page 2 mportant! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modifications.
  • Page 3 A58LMWSP282 ALM58SP On/off bail bar Start button Self-propel tirgger Handle adjustment Battery pack release Cutting height indicator Bar blade Operator’s manual Mulch plug Safety key ALM58SP24 A58LMWSP282 Grass catcher...
  • Page 4: Replacing The Blade

    INSTALLING AND REMOVING THE MULCH PLUG REPLACING THE BLADE...
  • Page 5: Operating The Mower

    START OPERATING THE MOWER UNFOLDING THE HANDLES USING THE SELF-PROPEL FEATURE...
  • Page 6: Adjusting The Cutting Height

    ADJUSTING THE CUTTING HEIGHT INSTALLING AND REMOVING THE BATTERIES STORING THE PRODUCT...
  • Page 7: Installing And Removing The Grass Catcher

    INSTALLING AND REMOVING THE GRASS CATCHER INSTALLING AND REMOVING THE SAFETY KEY...
  • Page 8 UNFOLDING THE HANDLES...
  • Page 10 INSTALLING AND REMOVING THE BATTERY PACKS NOTE: Every time the mower starts, it checks capacity of the battery packs. During operation, the mower draws power from the battery pack that has the higher capacity. click NOTE: The mower can run on either 1 battery or 2 for extended runtime.
  • Page 11 INSTALLING AND REMOVING THE SAFETY NOTE: The safety key must be installed to operate the mower.
  • Page 12 START OPERATING THE MOWER STOP...
  • Page 13 START USING THE SELF-PROPEL FEATURE STOP...
  • Page 14 INSTALLING AND REMOVING THE GRASS CATCHER NOTE: The mower does not start unless the grass catcher is properly installed. The grass catcher/ mulch plug frame slot has 2 microswitches that activate and allow the mower to start when the grass catcher or mulch plug is installled.
  • Page 16 ADJUSTING THE CUTTING HEIGHT NOTE: The mower height cutting range is 18-75 mm.
  • Page 18 INSTALLING AND REMOVING THE MULCH PLUG 1. Pull the mulch plug handle to its maximum length. 2. Insert the mulch plug assembly into the rear discharge chute, ensuring that the metal frame is properly aligned with its slot. 3. Push down on the mulch plug handle until the metal frame is fully inserted into its slot.
  • Page 20 REPLACING THE BLADE 40 N...
  • Page 21 NOTE: Always properly dispose of a used blade. NOTE: For the replacment blade part number, see the specifications table. NOTE: Tighten the blade bolt to a torque of 35- 40 Nm. Blade bolt tightening torque (35~40 Nm)
  • Page 22 STORING THE PRODUCT...
  • Page 24 NOTE: Store the product in a cool, dry, and well- ventilated area that is inaccessible to children. Keep the product away from corrosive agents, such as garden chemicals and de-icing salts. Do not store the product outdoors. vibr Iden It sh...
  • Page 25: Intended Use

    The product should be operated only with the battery packs specified BATTERY AND CHARGER in this manual. When using a battery-operated product, basic safety Model A58LMWSP282 ALM58SP24 ALM58SP precautions should always be followed to reduce the risk of fire, Battery pack...
  • Page 26: Work Area Safety

    ■ CORDLESS LAWNMOWER SAFETY WARNINGS Stay alert, watch what you are doing, and use common sense when operating the product. Do not operate the product while tired, ill, Before use, always visually inspect the product to ensure that blades, or under the influence of drugs, alcohol, or medication. A lapse in blade bolts, and cutter assembly are not worn or damaged.
  • Page 27: Transportation And Storage

    ■ Hands and feet of all persons are not clear of the cutting TRANSPORTING LITHIUM BATTERIES enclosure. Transport the battery in accordance with local and national provisions des, Never operate the product if the on/off switch on the handlebar does and regulations.
  • Page 28 SYMBOLS Read and understand all instructions before operating the product. Follow all warnings and safety instructions. Wear ear protection. Wear eye protection. Do not operate the product on inclines greater than 15°. Mow across the face of slopes, never up and down.
  • Page 32 Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC, 3149, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand AEG is a registered trade mark used under 960087559-xx license from AB Electrolux (publ)

This manual is also suitable for:

Alm58sp24Alm58sp

Table of Contents