Quantum ValueLoader DLT VS160 Quick Start Manual

ValueLoader™
Quick Start Guide
This Quick Start Guide explains how
to unpack, install, and operate your
ValueLoader DLT VS80, ValueLoader
DLT VS160, ValueLoader LTO-1,
ValueLoader LTO-2, or ValueLoader
SDLT 320 including how to correctly
handle magazines and tape cartridges.
For additional information, visit
www.Quantum.com, refer to the
Quantum ValueLoader User's Guide
installed as a PDF (portable document
for mat) file on the enclosed CD, or
contact Quantum Technical Sup port
and Customer Service by dialing
(800) 284-5101.
Note: Adobe Acrobat Reader
5.0 or later is required to view
and print PDF documents.
To download a free copy of
Adobe Acrobat Reader, go to
www.adobe.com.
Step 1: Unpack the ValueLoader
a. Look for markings on the shipping carton that indicate the top. If necessary,
position the carton so that it is top-side up.
b. Using scissors, a utility knife, or other appropriate tool, carefully cut the packing
tape along the length and ends of the carton.
c. Remove the accessories from the shipping carton and check the contents. The
accessories include the following items:
• SCSI cable and terminator
•
Regulatory insert and documentation
• Power cord
If this is a rackmount installation, check the rack kit contents. The rack kit contains
the following items:
• Hardware kit with clip nuts and bolts
• Mounting rails
• Fixing flanges
d. Lift the ValueLoader and padding out of the box and place it on a work surface, top
facing up.
e. Carefully remove the foam packaging from the ValueLoader and then remove the
bag.