Panasonic TH-32FS500Z Ehelp page 95

6. Select Auto Tuning
7. Select Search Mode
8. Set the item and press
Scan Mode
●
Quick:
Scans the suitable frequency for the selected satellite.
Full:
Scans the whole frequency range.
After settings, select
●
9. A confirmation screen is displayed and press
10. Select the region and press
automatically.)
When the operation is completed, the channel at the lowest position will
●
be displayed.
If no satellite channel is found, set
●
Configuration
■
Digital TV / Analogue TV
1. Select Auto Tuning
2. A confirmation screen is displayed and press
(Settings are made automatically.)
When the operation is completed, the channel at the lowest position will
●
be displayed.
This setting is applicable only for the selected TV mode.
●
■
Auto Tuning using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu.
2. Set Auto Tuning with following control panel buttons.
Move the cursor / select from a range of options / select the menu item
●
Access the menu / store settings after adjustments have been made or
●
options have been set with INPUT/OK/HOLD for MENU button
and press OK to access.
/ Scan Mode and press
OK to store.
Start scan and press
OK to start
to suit your environment.
and press OK to access.
- 95 -
OK to access.
OK to access.
OK to access.
Auto Tuning. (Settings are made
LNB Band Frequency
OK to start Auto
in LNB
Tuning.