Panasonic TH-32FS500Z Ehelp page 81

A2 (German) - Used in Australia, Malaysia, etc.
●
– Regular broadcast (Standard Audio): No indicator /
– BILINGUAL or DUAL MONO (MAIN I / SUB II):
– STEREO: /
= Note =
If the stereo signal is poor or the receiving conditions are not optimum or if
●
STEREO:MONO automatic switching occurs, it is recommended to switch
from STEREO to MONO.
Selected mode is not affected when the contents of the receiving signal
●
change.
When the receiving conditions deteriorate, listening will be easier if the
●
mode is set to the MONO position.
DUAL, also known as DUAL MONO or as BILINGUAL is not currently
●
transmitted in some countries.
Digital Audio Preference
(DD / MPEG / HE-AAC)
Selects the initial setting for audio tracks.
DD:
The priority is given to Dolby Audio (Dolby Digital).
MPEG:
The priority is given to MPEG. (Australia only)
HE-AAC:
The priority is given to HE-AAC. (New Zealand only)
Dolby Audio (Dolby Digital) is the method of coding digital signals
●
developed by the Dolby Laboratories. Apart from stereo (2ch) audio, these
signals can also be multi-channel audio.
MPEG is an audio compression method that compresses audio to the
●
smaller size without any considerable loss of audio quality. (Australia only)
HE-AAC is a perceptual coding method used to compress digital audio for
●
efficient storage and transmission. (New Zealand only)
Not valid in Analogue TV
●
- 81 -
/